VACUUM CLEARNERS
VRW-1300 (VOOT ROAD SWEEPING & WASHING )
VOOT VRW-1300 has many functions such as road cleaning/washing super road cleaning, roadside stone facade cleaning,
garbage and sewage recycling, and high-pressure washing. In addition, the VOOT VRW-1300 is equipped with two modes of
high and low pressure. According to the cleanliness of the road, high-pressure operation and low-pressure operation can be
selected, which can effectively improve the battery life. The high-pressure operation time of a single tank of clean water is up
to 40 minutes, and the low-pressure operation is up to 70 minutes. The car is equipped with an independent fast charge,
which can charge 100% in 2-3 hours. All-weather operation is possible. It is a new type of sweeper that turns dry sweeping into
wet sweeping, without the need to replace the filter element. Compared with traditional small sweepers, it has the
advantages of high sweeping efficiency, good effect, and no dust.
- The water tank is made of corrosion-resistant stainless steel, the power system is powered by lithium batteries, the
instrument battery management system and the whole machine state monitoring, configuration work mode and transition
movement mode.The cleaning device has the function of automatic protection and automatic reset in case of obstacles. - The washing and sweeping device has automatic collision avoidance protection function and automatic reset function when
encountering obstacles. - The control switches are centrally installed in the cab, and all electronic control operations can be
completed in the cab that equipped with heating and cooling air-conditioning. - The whole vehicle has good passing performance, strong suction power and good dust suppression effect when transferring
garbage. - Powered by pure electric, the vehicle is economic and environment-protected. Its range can reach 80- 100 kilometers,
which is in line with the national development of new energy vehicle policy. - The whole vehicle is electronically controlled and hydraulically executed. It is equipped with a large suction fan, which has
strong cleaning power and low operating noise. - The vehicle body is a rigid cold riveted frame, with a special load asymmetric suspension system, the chassis is safe and
stable. - Tire: 8-layer radial high-load tubeless tire is used, which is wear-proof and has a long service life.
- This product combines the overall structure of a dedicated chassis, combined sweeping and suction, hydraulic selfunloading system, three-in-one “3D” washing cabinet, 360° all-round high-definition intelligent surveillance camera and other
advantages. - The pressure of the high-pressure washing and sweeping system is adjustable, and the washing pressure can be adjusted at
any time according with the cleanliness of the road surface, which effectively saves electricity. - The optional Internet of Vehicles management and control system can monitor the vehicle running track, operation time,
operation effect, electric quantity, etc. in real time. - The vehicle is electronically controlled hydraulically. It adopts electric negative pressure three-stage dry and wet separation
dust removal and filtration system, inertial cyclone dust removal, fine water mist dust removal, water circulation filter dust
removal, maintenance-free stainless steel sintered filter dust removal and electric sweep dust suppression system, which has
strong cleaning power and low operation noise. - The hose at the rear of the vehicle can absorb garbage and dust from the road and corners。Garbage at the bottom of the
vehicle is cleaned by sweeping and high-pressure washing, and then recycled by negative pressure suction cups。
01
Transmission System
Adopting rear axle transmission, the drive motor is a 7.5kw AC asynchronous motor with high
reliability, long service life, strong overload capacity, which is easy to use, install and maintain. In addition, it is small in size
and wide in function, which is suitable for narrow roads cleaning such as back alleys and property communities. The highquality motor efficiency and the best cooling method ensure the safe and reliable operation of the entire motor system, which
not only satisfies the driving performance of the product, but also achieves greater climbing ability.
02
Drive System
The chassis is non-load-bearing, with riveted beams as the main body. Riveted beams have high flexural
strength and excellent mechanical properties. The ride-on and the frame are connected by elastic elements. The vibration of
the frame is transmitted to the body through elastic elements, and most of the vibration is absorbed by the frame. In the
event of a crash, the frame absorbs most of the impact and protects the body. The stability and safety of the whole vehicle
are better.
03
Steering System
It consists of steering wheel, steering gear, steering knuckle, steering knuckle arm, tie rod, straight rod, etc.
Electric power steering is more flexible and convenient.
04
Braking System
The braking system adopts hydraulic transmission and is equipped with vacuum.